The Global Proheat Induction Heating System Market size is projected to grow from USD 4.8 billion in 2018 to USD X.X billion by 2028, at a Compound Annual Growth Rate (CAGR) of 5.4% during the forecast period. The growth of the proheat induction heating system market can be attributed to its increasing demand for power transmission pipelines, pipe fabrication shops, and shipbuilding applications across various regions such as North America and Europe.
A proheat induction heating system, in short, is a type of heating system that uses heat generated by electric current to provide energy for various industrial and commercial applications. In the process of a proheat induction heating system, electrical current flows through the metal tube or pipe to be heated. The electron flow heats up the surface of one side of the coil, then that heat travels through a small gap and induces (creates) voltage on the other side of the coil with opposite polarity. This alternating electric field creates eddy currents in magnetic materials such as steel tubes or pipes, causing thermal diffusion between them and generating intense localized heat at their interface until they reach temperature equilibrium. A transformer is used to boost power levels while regulating its output frequency for stable operation; it also converts high-voltage AC into lower voltage DC electricity. A rectifier unit may replace a transformer so that the induction heating equipment can work with DC power.
On the basis of Type, the global proheat induction heating system market is segmented into Pro-Heat 35 and Other.
The Pro-Heat 35 is a thermal system that utilizes induction heating. It consists of an AC power generator, an electronic control module, and a metal object to be heated. The power input can be either AC or DC current. In spite of its name "35", it requires much more than 35 watts for operation; if some other type of transformer is used instead of a rectifier unit then the equipment may require up to 500 W per kW at rated load in order to generate sufficient heat flux (thermal energy delivered). The Pro-Heat 35 consists of two sets of coils in a “scissors” configuration. A DC electrical current is passed through one coil, inducing an AC magnetic field that generates heat within the other coil. The heating elements are designed to reach operating temperature quickly and maintain that temperature reliably with little or no input from outside sources such as natural gas or electricity. These types of units can be installed for use immediately without any additional equipment required for operation, thus eliminating installation costs and time delays. A Pro-Heat 35 induction heating system is used for pipe fabrication shops, power piping, and petrochemical industries.
On the basis of Application, the global proheat induction heating system market is segmented into Transmission Pipeline, Pipe Fabrication Shops, Power Piping, Petrochemical, Shipbuilding.
The proheat induction heating system is used for transmission pipeline that carries oil or gas from wells to refineries and terminals. These units are typically installed on the underside of a pipe, which provides heat in order to maintain desired flow rates without the need for external energy sources such as natural gas or electricity. A proheat induction heating system heats the oil and gas as it moves through the pipeline. It has been found that a heated pipe can transport liquid faster than one at room temperature, which translates into economic savings for consumers of energy.
Proheat Induction Heating Systems can be used for pipe fabrication shops to heat individual pipes without the use of a tank. They are also able to quickly and evenly heat pipes up, which means that they do not need much time or energy in order to get hot enough. This is because induction heating systems produce electromagnetic waves at high-frequency levels so that when these waves come into contact with metal surfaces, heat flows from the surface instead of through it. The use of a proheat induction heating system for pipe fabrication shops is the replacement of old technology with new. The primary advantage it has over older technologies is that it heats metal at a much lower temperature than other methods, which saves time and energy costs in turn saving on production expenses. It also offers greater control to craftspeople so they can more easily work out any design problems as well as being less susceptible to hot spots or cold zones within the heated area. One further benefit this method offers is its affordability when compared to other ways of heating metals, making it one of the most popular choices among manufacturers today.
A Proheat induction heating system is a type of electric resistance heater that is used for power piping. The proheat 35 has an efficient design with the capability to accommodate high-temperature fluid flows and steam condensate as well in very harsh operating conditions, which makes it particularly suited for power piping applications. This system is used to heat the pipes in power piping. The pipe that needs to be heated reaches out of the furnace and is installed into a clamp-on coil attached directly onto it using connection clamps. It operates by inducing currents of electricity through an electrically resistive metal workpiece, which creates very high temperatures so quickly that most metals cannot even sustain being exposed for more than 15 seconds or else they will melt (copper melts at around 1000°C).
The proheat induction heating system for Petrochemical is used to heat and cool processes in the plant. It helps maintain the necessary operating temperature of equipment which decreases downtime as well as reduces production costs. The Pro-Heat 35 installation provides a clean, safe working environment by eliminating potential sparks that could ignite flammable vapors or gases found onsite. A Proheat induction heating system is a specific type of electric coil used in the petrochemical industry. It's typically located on pipes and pipe connections, as well as tanks and other equipment to heat them up for various purposes like piping process fluids or adding chemicals. The coils are placed around whatever they need to heat, mimicking how an oven heats food from the outside-in by surrounding it with hot air. This also minimizes possible interference with any nearby electronics that might be sensitive to static electricity (like computers).
Shipbuilding industries use proheat induction heating systems primarily for cutting steel plates into shipboard components such as hulls and decks. A proheat induction heating system is used to heat the metal plates which are going to be welded together. It does this by sending an electromagnetic field through them so that they get heated and then cooled down again by a series of water-jacketed pipes (which can also dry out). A proheat induction heating system is an alternative to traditional electric furnaces in the shipbuilding industry. The most important benefit of a pro-heat induction heating system over other systems, such as electrical and gas heaters, is that it does not use flames. This eliminates the risk of fire or explosion during welding operations, which are common on ships because they use so much metal with high flammability levels (cotton fabric).
On the basis of Region, the global proheat induction heating system market is segmented into North America, Latin America, Europe, Asia Pacific, and Middle East & Africa. Among these regions, the US dominates the Americas region with a share of over 70%. The European region has two major countries- the UK and Germany which account for more than 50% of the regional demand. China accounts for 60% of total revenues in APEJ. Japan's contribution to APAC's overall revenue is around 30%. In terms of growth, the MEA region is set to grow at the highest CAGR rate. The major factors driving this trend are a large number of initiatives undertaken by countries in order to support economic development and a great need for infrastructure projects.
The growth factors for the global proheat induction heating system market are the increasing use of pipelines in power transmission, growing demand from the shipbuilding industry, and a growing number of construction projects. The global market is mainly driven by the need for improved safety and productivity. With the risk of electric shock minimized, accident rates are expected to decrease which would then reduce overall costs associated with production injuries. There are many users who have an increasing need for more precise temperature control within demanding applications such as power piping or in high-pressure environments that require a low heat gradient at the surface of their products; this has increased demand for types of heating systems like ProHeat 35.
Up Market Research published a new report titled “Proheat Induction Heating System Market research report which is segmented by Types (Pro-Heat 35, Other), By Applications (Transmission Pipeline, Pipe Fabrication Shops, Power Piping, Petrochemical, Shipbuilding), By Players/Companies Miller Electric, RHS”. As per the study the market is expected to grow at a CAGR of XX% in the forecast period.
Report Attributes | Report Details |
Report Title | Proheat Induction Heating System Market Research Report |
By Type | Pro-Heat 35, Other |
By Application | Transmission Pipeline, Pipe Fabrication Shops, Power Piping, Petrochemical, Shipbuilding |
By Companies | Miller Electric, RHS |
Regions Covered | North America, Europe, APAC, Latin America, MEA |
Base Year | 2020 |
Historical Year | 2018 to 2019 (Data from 2010 can be provided as per availability) |
Forecast Year | 2028 |
Number of Pages | 211 |
Number of Tables & Figures | 148 |
Customization Available | Yes, the report can be customized as per your need. |
The report covers comprehensive data on emerging trends, market drivers, growth opportunities, and restraints that can change the market dynamics of the industry. It provides an in-depth analysis of the market segments which include products, applications, and competitor analysis.
The market is segmented by Type Pro-Heat 35, Other and By Application Transmission Pipeline, Pipe Fabrication Shops, Power Piping, Petrochemical, Shipbuilding.
Some of the companies that are profiled in this report are:
Proheat Induction Heating System Market research report delivers a close watch on leading competitors with strategic analysis, micro and macro market trend and scenarios, pricing analysis and a holistic overview of the market situations in the forecast period. It is a professional and a detailed report focusing on primary and secondary drivers, market share, leading segments and geographical analysis. Further, key players, major collaborations, merger & acquisitions along with trending innovation and business policies are reviewed in the report.
Key Benefits for Industry Participants & Stakeholders:
Based on region, the market is segmented into North America, Europe, Asia Pacific, Latin America and Middle East & Africa (MEA). North America region is further bifurcated into countries such as U.S., and Canada. The Europe region is further categorized into U.K., France, Germany, Italy, Spain, Russia, and Rest of Europe. Asia Pacific is further segmented into China, Japan, South Korea, India, Australia, South East Asia, and Rest of Asia Pacific. Latin America region is further segmented into Brazil, Mexico, and Rest of Latin America, and the MEA region is further divided into GCC, Turkey, South Africa, and Rest of MEA.
We have studied the Proheat Induction Heating System Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2028.
How you may use our products:
Reasons to Purchase the Proheat Induction Heating System Market Report:
Some other reports from this category!