The Global Magnetic Particle Fluorescent Magnetic Powder Flaw Detector Market Size is expected to grow at a CAGR of 8.2% during the forecast period from 2021-2028. The Global Magnetic Particle Fluorescent Magnetic Powder Flaw Detector Market Size was valued at USD 769 million in 2018 and is projected to reach USD 1.1 billion by 2028, growing at an estimated annual growth rate of 8.2%. The demand for these devices has been increasing due to factors such as stringent regulatory norms and high product adoption rates across various industries.
Magnetic particle fluorescent magnetic powder flaw detector is an industrial handheld device that helps in the detection of flaws and defects on a metallic surface. The device contains two parts: one part, which emits ultraviolet light, illuminates the material being inspected; the other part detects flaws by analyzing fluorescence or absorption properties of particles dispersed within the material. Magnetic particle fluorescent magnetic powder flaw detectors are often used to detect long-wave cracks and short-wave cracks such as porosity at high rates when there is no need for power supply access.
On the basis of Types, the market is segmented into Portable and Fixed.
A Portable Magnetic Particle Fluorescent Magnetic Powder Flaw Detector is a device for detecting flaws in ferromagnetic materials such as pipes, sheet metal, and steel. It works by using fluorescent magnetic particles that are sprayed on the object to be inspected. If there is a flaw present then it will show up under ultraviolet light due to the higher magnetic field strength at the flaw. The device can be used in many industries including boiler plants, oil, and gas extraction facilities, petrochemical plants, airports for detecting cracks on aircraft before they fly, ships to detect corrosion below the waterline, etc.
Fixed Magnetic Particle Fluorescent Magnetic Powder Flaw Detector is a device that detects the slightest defect in materials, such as welds and castings. This helps manufacturers achieve consistent quality standards, enabling them to produce high-quality products at competitive prices. Fixed Magnetic Particle Fluorescent Magnetic Powder Flaw Detector is used in industries such as shipbuilding, automotive manufacturing, power generation, and distribution.
On the basis of Applications, the market is segmented into Boiler Plant, Petrochemical, Aviation, Ship, Railway, Bridge.
The primary use of a portable or fixed magnetic particle fluorescent magnetism flaw detector is to inspect for cracks on boilers and pipes which provide water supply from steam generators within power plants. This helps to detect leaks early enough so that repair can be done before it has any adverse effect on other parts associated with the power plant. A magnetic particle fluorescent magnetism flaw detector is a portable device that can be moved to any location within the boiler and pipes in order to inspect for potential leaks or cracks.
The inspection of steel casings, ducts, piping, vessels, storage tanks, and other equipment used in petrochemicals plants are done with magnetic particle fluorescent magnetism flaw detectors. This helps detect leaks early on before they have an adverse effect on safety or operations at the facility. Magnetic particle fluorescent magnetism flaw detector systems are used for measuring wall thicknesses, detecting corrosion, monitoring stress concentrations, identifying cracks like fatigue crack growth rates to prevent sudden failure, and many other applications.
Magnetic particle fluorescent magnetic powder flaw detectors that operate as fixed devices are usually installed inside aircraft fuselages prior to production so it can identify flaws like corrosion while being manufactured. It also detects anything out of its environment like metal objects that are not supposed to be on the plane. Magnetic particle fluorescent magnetic powder flaw detectors that operate as portable devices are usually used to detect flaws, like cracks in an airplane's skin during its pre-flight inspections. Magnetic particle fluorescent magnetic powder flaw detector technology was selected because it has been extensively tested and proved reliable against corrosion caused by sulfur dioxide gas released from fuel tanks as well as jet oil oxidation products.
Magnetic Particle Fluorescent Magnetic Powder Flaw Detector is used in ship applications to detect the flaws that are occurring on the surface of steel sheets. These magnetic particles get attracted by these flaws and make them visible through fluorescence. This technique has been widely adopted because it minimizes human exposure, while still catching dangerous flaws which might otherwise go unnoticed without detection equipment.
Magnetic particle fluorescent magnetic powder flaw detectors can inspect all types of rails as well as any rail-mounted structures such as bridges for flaws that may cause a train derailment. The fixed type devices should be installed where there are no interfering currents from cables, power lines, etc., so it does not interfere with its functioning. It also cannot penetrate substances greater than 0.015 inches thick, so it is prevented from detecting flaws in the ground, for instance.
A Magnetic Particle Fluorescent Magnetic Powder Flaw Detector is a device that uses magnetic particles to detect flaws in metal surfaces. A bridge may use this technology for the detection of cracks and corrosion. The number one reason bridges fail is from structural movements, such as earthquakes (although these can be prevented by using durable steel). Bridge failure due to mechanical or electrical problems is much more common than those failures caused by earthquake damage. It has been suggested that the main cause of bridge collapses are bolts that have not been properly tightened; therefore, it makes sense to use a Magnetic Particle Fluorescent Magnetic Powder Flaw Detector during construction phases when bolt tightness must be checked frequently.
On the basis of Region, the market is segmented into North America, Europe, Asia Pacific, and the Rest of the World. North America is predicted to be the largest regional segment market for Magnetic Particle Fluorescent Magnetic Powder Flaw Detector by 2028 end.
Up Market Research published a new report titled “Magnetic Particle Fluorescent Magnetic Powder Flaw Detector Market research report which is segmented by Types (Portable, Fixed), By Applications (Boiler Plant, Petrochemical, Aviation, Ship, Railway, Bridge), By Players/Companies Callington Haven, Magnaflux, Katex NDT Equipment, Novotest, Nihon Denji Sokki co ltd, TMTeck, Karl Deutsch, Foerster Instruments Inc, Olympus Corporation, Advanced NDT, Krautkramer, Hitachi Power Solutions, Roop Telsonic, Sonatest, Danatronics”.
Report Attributes | Report Details |
Report Title | Magnetic Particle Fluorescent Magnetic Powder Flaw Detector Market Research Report |
By Type | Portable, Fixed |
By Application | Boiler Plant, Petrochemical, Aviation, Ship, Railway, Bridge |
By Companies | Callington Haven, Magnaflux, Katex NDT Equipment, Novotest, Nihon Denji Sokki co ltd, TMTeck, Karl Deutsch, Foerster Instruments Inc, Olympus Corporation, Advanced NDT, Krautkramer, Hitachi Power Solutions, Roop Telsonic, Sonatest, Danatronics |
Regions Covered | North America, Europe, APAC, Latin America, MEA |
Base Year | 2020 |
Historical Year | 2018 to 2019 (Data from 2010 can be provided as per availability) |
Forecast Year | 2028 |
Number of Pages | 234 |
Number of Tables & Figures | 164 |
Customization Available | Yes, the report can be customized as per your need. |
The report covers comprehensive data on emerging trends, market drivers, growth opportunities, and restraints that can change the market dynamics of the industry. It provides an in-depth analysis of the market segments which include products, applications, and competitor analysis.
The market is segmented by Type Portable, Fixed and By Application Boiler Plant, Petrochemical, Aviation, Ship, Railway, Bridge.
Some of the companies that are profiled in this report are:
Magnetic Particle Fluorescent Magnetic Powder Flaw Detector Market research report delivers a close watch on leading competitors with strategic analysis, micro and macro market trend and scenarios, pricing analysis and a holistic overview of the market situations in the forecast period. It is a professional and a detailed report focusing on primary and secondary drivers, market share, leading segments and geographical analysis. Further, key players, major collaborations, merger & acquisitions along with trending innovation and business policies are reviewed in the report.
Key Benefits for Industry Participants & Stakeholders:
Based on region, the market is segmented into North America, Europe, Asia Pacific, Latin America and Middle East & Africa (MEA). North America region is further bifurcated into countries such as U.S., and Canada. The Europe region is further categorized into U.K., France, Germany, Italy, Spain, Russia, and Rest of Europe. Asia Pacific is further segmented into China, Japan, South Korea, India, Australia, South East Asia, and Rest of Asia Pacific. Latin America region is further segmented into Brazil, Mexico, and Rest of Latin America, and the MEA region is further divided into GCC, Turkey, South Africa, and Rest of MEA.
We have studied the Magnetic Particle Fluorescent Magnetic Powder Flaw Detector Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2028.
How you may use our products:
Reasons to Purchase the Magnetic Particle Fluorescent Magnetic Powder Flaw Detector Market Report:
Some other reports from this category!