The extraction arms market is expected to grow from $1.07 billion in 2018 to reach a value of $2.82 billion by 2028, at an estimated CAGR of 8.3%. Extraction arms are used for removing harmful gas and particles from the environment where welding work is being carried out. These arms provide protection against exposure to welding fumes, dust, smoke, and other airborne contaminants that are hazardous to health as well as for improved operational efficiency & productivity while working with these gases or particles.
Extraction arms are devices that extract fumes, smoke, and dust from the workplace. These harmful substances can be a major health hazard for welders working in enclosed environments like trailers or tanks because they have nowhere to go but into their lungs. Working with extraction arm systems will limit the number of irritants inhaled by these workers as well as those around them such as co-workers and bystanders. Extraction arms come in different types, each suited for certain situations.
On the basis of type, the global extraction arms market is segmented into fixed, wall-mounted, ceiling-mountable, and others.
Fixed extraction arms are the most commonly used type of extractor and come in a variety of styles. The design is optimal for welding fume, dust, smoke, or any other powder airborne emissions that need to be extracted from an enclosed space. Fixed extraction arms can either be ceiling mounted (ceiling-mount) or wall-mounted (wall-mounted). These fixed types may also include benchtops that are easily moveable on wheels. A stationary benchtop with no arm is typically not classified as a true "fixed" type because it cannot remove fumes like the others listed above. They often have adjustable speeds and power settings depending on what material they will handle best without creating sparks or additional debris when extracting fumes at full speed.
Wall-mounted type extraction arms are devices that can be installed on a wall to filter air. The ducts of these machines are usually placed about three feet from the floor and they often remain in operation for 12 hours or more at one time, 24 hours per day during peak periods. This is because their filters require replacement periodically with most manufacturers recommending an interval of two weeks or so between replacements. Wall-mounted extractors work best when they’re used indoors although some models may also have outdoor capabilities as well.
Ceiling-mountable extraction arms are typically used for extracting fumes. These types of vents, which are mounted directly to the ceiling in a downward position with an integrated exhaust fan at their base that pushes air out through a tube or other device, can be a single unit (i.e., one vent) or multiple units operated by remote control from anywhere on the shop floor; these multiunit systems allow users to fine-tune airflow and noise levels as needed without moving around the manufacturing floor.
On the basis of application, the global extraction arms market is segmented into welding fume extractors (WF), dust extractors (DF), or smoke extractors (SF).
The application of extraction arms in welding fume extractors is to support the welder’s work. The smoke, dust, and fumes from the welder's work are constrained by a hood (which can be as simple as an aluminum sheet) which must have some means for air circulation - this is where extraction arms come in.
The application of extraction arms in dust extractors is to remove harmful dust particles from the air. The process captures and removes large amounts of airborne particulates, including those caused by welding fume and sawdust as well as other types.
The application of extraction arms in smoke extractors is ventilation. Smoke extractor fans create a volume of higher-pressure air, which forces the smoke and other particles into an enclosed cabinet with a particle filter inside it. The extracted clean air exits from the fanned system through ducts that are usually mounted on walls or installed as ceiling fixtures. Extracting any residual vapor content would require using vacuum hoods to remove heat and moisture from the environment.
On the basis of region, the global extraction arms market is segmented into North America, Latin America, Europe, Asia Pacific, and Middle East & Africa.
North America holds the largest share in 2017 owing to the high demand for welding fume extractors in this region. It is followed by Europe due to its growing construction industry. The Asia Pacific is the fastest-growing market owing to its large population.
Latin America and Middle East & Africa are projected to grow at a CAGR of 11.06% and 12.92%, respectively, during the forecast period from 2018 till 2028 due to growing extraction arms demand in these regions for welding fume extractors as well as increasing mining activities which creates dust pollution on a large scale.
The growth of the global extraction arms market will be driven by a number of factors. First, there is an increasing demand for safety and protection in welding fume extractors due to increased awareness about occupational hazards related to long-term exposure to airborne fumes or dust. Moreover, miniaturization coupled with automation has also led manufacturers to introduce new products that have higher performance levels than previous generation units but at lower costs. Finally, continuous improvements are being made through government regulations on emissions from power plants as well as industrial facilities which increases the need for pollution control equipment such as extraction systems.
Up Market Research published a new report titled “Extraction Arms Market research report which is segmented by Types (Fixed, Wall-mounted, Ceiling-mount, Bench-top, Other), By Applications (Welding Fume, Dust, Smoke, Other), By Players/Companies Alsident System, Engmar, Fumex, Geovent, Kemper, Klimawent, Lincoln Electric, Menegon Sp. z o.o., Norfi Absaugtechnik, Plymovent, Teka, OSKAR, Airflow Systems, Nederman, Diversitech”. As per the study the market is expected to grow at a CAGR of XX% in the forecast period.
|Report Attributes||Report Details|
|Report Title||Extraction Arms Market Research Report|
|By Type||Fixed, Wall-mounted, Ceiling-mount, Bench-top, Other|
|By Application||Welding Fume, Dust, Smoke, Other|
|By Companies||Alsident System, Engmar, Fumex, Geovent, Kemper, Klimawent, Lincoln Electric, Menegon Sp. z o.o., Norfi Absaugtechnik, Plymovent, Teka, OSKAR, Airflow Systems, Nederman, Diversitech|
|Regions Covered||North America, Europe, APAC, Latin America, MEA|
|Historical Year||2018 to 2019 (Data from 2010 can be provided as per availability)|
|Number of Pages||232|
|Number of Tables & Figures||163|
|Customization Available||Yes, the report can be customized as per your need.|
The report covers comprehensive data on emerging trends, market drivers, growth opportunities, and restraints that can change the market dynamics of the industry. It provides an in-depth analysis of the market segments which include products, applications, and competitor analysis.
The market is segmented by Type Fixed, Wall-mounted, Ceiling-mount, Bench-top, Other and By Application Welding Fume, Dust, Smoke, Other.
Some of the companies that are profiled in this report are:
Extraction Arms Market research report delivers a close watch on leading competitors with strategic analysis, micro and macro market trend and scenarios, pricing analysis and a holistic overview of the market situations in the forecast period. It is a professional and a detailed report focusing on primary and secondary drivers, market share, leading segments and geographical analysis. Further, key players, major collaborations, merger & acquisitions along with trending innovation and business policies are reviewed in the report.
Key Benefits for Industry Participants & Stakeholders:
Based on region, the market is segmented into North America, Europe, Asia Pacific, Latin America and Middle East & Africa (MEA). North America region is further bifurcated into countries such as U.S., and Canada. The Europe region is further categorized into U.K., France, Germany, Italy, Spain, Russia, and Rest of Europe. Asia Pacific is further segmented into China, Japan, South Korea, India, Australia, South East Asia, and Rest of Asia Pacific. Latin America region is further segmented into Brazil, Mexico, and Rest of Latin America, and the MEA region is further divided into GCC, Turkey, South Africa, and Rest of MEA.
We have studied the Extraction Arms Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2028.
How you may use our products:
Reasons to Purchase the Extraction Arms Market Report:
Some other reports from this category!