Global 3D printing metal market was worth USD 380.3 million in 2020. It is projected to grow at a compound annual rate (CAGR of 25.7%) between 2021 and 2028. Market growth is expected to be supported by rising investments in 3D printing businesses over the next few years. Mantle Inc., for example, has raised USD 25,000,000 to fund the 2022 installation of 3D printing equipment. Mantle, Inc., a manufacturer of 3D components, has produced more than 1 million parts for various applications, including medical devices, deodorant packaging, as well as dishwasher components. According to the company, TrueShape 3D printing technology has reduced lead times and cost by approximately 65% in production.
Additive Manufacturing (AM), also known as 3D printing, is used to create dental products that are suitable for patients. This includes partial dentures, crowns and bridges. The traditional manufacturing method isn't suitable for low volume manufacturing because the equipment is often different in size. This is where AM technology comes in and is expected to fuel the U.S. market growth.
AM is used by manufacturers to make clamps, forceps and prothetic limbs. Many companies are using AM processes in healthcare applications. 3D Systems Healthcare, for example, is expected to work with the medical industry in order to increase the use of additive manufacturing in the dental and medical industries.
Market players will be able to take advantage of the shift from rapid prototyping and production using 3D printing. According to a recent survey, more than 50% of 3D hubs reported that 3D printing is being used for the production of functional end-use components. In recent years, 3D printing has been used in increasing numbers by industries such as transportation and automotive.
In 2020, the powder form segment was responsible for more than 94% of the global market's total revenue. There are many parameters that impact metal powder particles' ability to be added to the final component. This includes both the chemical and physical properties of the raw material. These must be well known and characterized. In the next few years, this will increase the demand for metal powder. To get fine prints of the final product, the spherical metal particles used in 3D printing must be very small. They should typically range from 15 to 75 microns.
To achieve the best build, the particle distribution must be uniform. Filaments typically consist of a mixture of metal and polymer. The metal is then coated with a layer made of PLA or ABS. Producers are currently working to find cost-effective ways to print with filament, as compared with selective laser melting. This will increase the demand for filaments in the future.
The highest revenue share, at over 41%, was held by the titanium product segment in 2020. It is expected to grow at the fastest rate of CAGR during the forecast period. The segment is expected to grow due to the increasing demand for titanium-based products across various industries. They are non-corrosive, high-resistant to harsh environments and have high durability. Market growth will be driven by the compatibility of traditional 3D printers for printing semi-metal equipment, when used with polymers and in filament form.
It is expected that the aerospace and defense industries will be able to support high initial costs while also adapting to new technologies, which will drive the development of titanium powder for 3D printer applications. The 3D printing industry will be driven by an innovative aerospace approach that takes advantage of the need for complex geometric structures. This is expected to increase the demand for titanium powder.
Due to its low carbon and high content of chromium, stainless steel will see significant demand in the future. Parts made from stainless steel are strong and lightweight. Stainless steel is also ideal for printing large objects with a high quality surface finish.
Europe will experience the highest CAGR of 27% based on its region. It is expected to grow at a rate of more than 27% between 2021 and 2028. In terms of adoption of 3D printing in end parts, Europe is led by the U.K. and France. This includes the aerospace and healthcare sectors. A number of countries have created a national strategy to support additive manufacturing in their Industry 4.0 or advanced manufacturing strategies.
Attenborough Dental, Renishaw and Bowman International are the major companies using 3D printing in the U.K. for crowns and bridges. Bowman International makes bearing cages. GKN manufactures automotive and aerospace components. The vast majority of U.K. industries have yet to adopt metal additive manufacturing technology. This is a sign of significant market potential.
3D printing is expected to grow the market in Asia Pacific due to increasing adoption by aerospace companies. Hindustan Aeronautics Ltd. (HAL) is the largest Indian aircraft manufacturer. It uses metal AM technology for various components. HAL, for instance, is using Direct Metal Laser Sintering to make components for the Hindustan Turbofan Engine-25 (HTFE-25).
Global market is in its growth phase and has huge potential due to its growing penetration and acceptance across various industries. There are also increasing investments by small businesses in the market. The market is expected to see an increase in merger and acquisition activity due to the increasing competition. Aerojet Rocketdyne Holdings, Inc. purchased 3D Materials Technology, Inc. (3DMT) in 2019. This provider of additive manufacturing solutions was acquired by Aerojet Rocketdyne Holdings, Inc. 3DMT's acquisition is expected to help the company expand its product & service offerings in the aerospace and defense industries. The following are some of the most prominent players in the global 3D metal printing market:
Arcam AB
ExOne GmbH
Carpenter Technology Corp.
Renishaw PLC
Materialise NV
3D Systems Corp.
Voxeljet AG
Sandvik AB
Hoganas AB
GKN PLC
Up Market Research published a new report titled “3D Printing Metal Market research report which is segmented by Product (Titanium, Nickel), by Form (Filament, Powder), by Application (Aerospace & Defense, Medical & Dental), By Players/Companies Arcam AB, Sandvik AB, Voxeljet AG, Hoganas AB, Carpenter Technology Corp, GKN PLC, Renishaw PLC, 3D Systems Corp, Materialise NV, ExOne GmbH”. As per the study the market is expected to grow at a CAGR of XX% in the forecast period.
Report Attributes | Report Details |
Report Title | 3D Printing Metal Market Research Report |
By Product | Titanium, Nickel |
By Form | Filament, Powder |
By Application | Aerospace & Defense, Medical & Dental |
By Companies | Arcam AB, Sandvik AB, Voxeljet AG, Hoganas AB, Carpenter Technology Corp, GKN PLC, Renishaw PLC, 3D Systems Corp, Materialise NV, ExOne GmbH |
Regions Covered | North America, Europe, APAC, Latin America, MEA |
Base Year | 2020 |
Historical Year | 2018 to 2019 (Data from 2010 can be provided as per availability) |
Forecast Year | 2028 |
Number of Pages | 228 |
Number of Tables & Figures | 160 |
Customization Available | Yes, the report can be customized as per your need. |
The report covers comprehensive data on emerging trends, market drivers, growth opportunities, and restraints that can change the market dynamics of the industry. It provides an in-depth analysis of the market segments which include products, applications, and competitor analysis.
The market is segmented by Product (Titanium, Nickel), by Form (Filament, Powder), by Application (Aerospace & Defense, Medical & Dental).
3D Printing Metal Market research report delivers a close watch on leading competitors with strategic analysis, micro and macro market trend and scenarios, pricing analysis and a holistic overview of the market situations in the forecast period. It is a professional and a detailed report focusing on primary and secondary drivers, market share, leading segments and geographical analysis. Further, key players, major collaborations, merger & acquisitions along with trending innovation and business policies are reviewed in the report.
Key Benefits for Industry Participants & Stakeholders:
Based on region, the market is segmented into North America, Europe, Asia Pacific, Latin America and Middle East & Africa (MEA). North America region is further bifurcated into countries such as U.S., and Canada. The Europe region is further categorized into U.K., France, Germany, Italy, Spain, Russia, and Rest of Europe. Asia Pacific is further segmented into China, Japan, South Korea, India, Australia, South East Asia, and Rest of Asia Pacific. Latin America region is further segmented into Brazil, Mexico, and Rest of Latin America, and the MEA region is further divided into GCC, Turkey, South Africa, and Rest of MEA.
We have studied the 3D Printing Metal Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2028.
How you may use our products:
Reasons to Purchase the 3D Printing Metal Market Report:
Some other reports from this category!