Global Unidirectional Knife Gate Valves Market by Type (Wafer Type, Lug Type), By Application (Commercial, Industrial, Others) and Region (North America, Latin America, Europe, Asia Pacific and Middle East & Africa), Forecast To 2028
The Global Unidirectional Knife Gate Valves Market size is projected to grow at a CAGR of 4.5% from 2021-2028. The growth in this market can be attributed to factors such as the increased demand for energy conservation and sustainability, owing to rising environmental concerns and increasing awareness among consumers about climate change.
Unidirectional knife gate valves are a type of metal-to-metal sealing valve that relies on the use of an elastomeric seal to prevent leakage. Unidirectional knife gate valves are a type of valve that is uni-directional, meaning it can only flow in one direction. The motion created by the blades on either side of the opening creates an even closure force across all sections and eliminates any pressure loss through other openings or areas where outgassing would occur. This offers increased safety for this product as well as lower maintenance needs over competitive products. The function of these valves is to allow only one direction to flow through them, which makes them ideal for applications where only one direction should be allowed such as in water or gas distribution networks and oil refineries.
On the basis of Type, the global unidirectional knife gate valves market is segmented into wafer type and lug type.
Wafer-Type:
Wafer-type unidirectional knife gate valves are engineered with the use of a flat blade that is fixed to one side and biased against a wafer plate on the other. The movement of these blades causes them to open or close depending on direction, while still allowing only one-way flow through it. This design allows for easy installation as well as enhanced sealing capabilities compared to lug-type knives which expose both sides when opened. Wafer-type unidirectional knife gate valves are available in a range of sizes from 16mm to 400mm and cover pipe diameters ranging from less than 25 mm up to 50 cm, while lug type is only offered for smaller pipes.
Lug-Type:
Lug-type unidirectional knife gate valves are the most common type of this product. Lug-type valve has a simple design that consists of two sliding disks with one disk mounted on top and another below it in such a manner they can move together or in opposite directions; these knives have wide edges to cut through solids, which seals them off between nozzles on both sides when opened after passing through the flow direction. This configuration allows for single-direction cutting action without the need for any auxiliary equipment like clutches or reversing mechanisms.
On the basis of Application, the global unidirectional knife gate valves market is segmented into Commercial, Industrial, Others.
On the basis of Region, the global unidirectional knife gate valves market is segmented into North America, Latin America, Europe, Asia Pacific, and Middle East & Africa. North America is the leading region in this market; as it accounts for over half of the global unidirectional knife gate valves consumption share. The high level of industrialization has resulted in an increased need to regulate fluids by using valve technology such as unidirectional knives which makes them ideal for applications where only one direction should be allowed such as in water or gas distribution networks and oil refineries. The commercial segment is expected to grow at a higher CAGR during the forecast period owing to its increasing adoption among various end-user industries such as the food processing industry due to safety reasons. Latin America is estimated to dominate this market throughout the analysis period on account of plant construction activities in countries like Brazil and Colombia focused on hydrocarbon extraction activities coupled with an increasing demand for natural gas as a source of power generation.
Growth Factors For The Global Unidirectional Knife Gate Valves Market:
-Rapid industrialization in the Asia Pacific and Latin American countries is driving the demand for unidirectional knife gate valves.
-The rising need to improve safety conditions by preventing leakage of fluids led to increased use of these knives which are more reliable than conventional plate-style valve designs.
-Increases in manufacturing activities due to higher global economic growth have also contributed towards market adoption, especially within developed regions such as North America and Europe.
- The growth of these markets across different regions can also be attributed to the growing demand for unidirectional knife gate valves in developing countries such as India and China.
Up Market Research published a new report titled “Unidirectional Knife Gate Valves Market research report which is segmented by Types (Wafer Type, Lug Type), By Applications (Commercial, Industrial, Others), By Players/Companies DeZURIK, ORBINOX, Bray, LK Valves, Davis Valve, Tecofi”. As per the study the market is expected to grow at a CAGR of XX% in the forecast period.
Report Scope
| Report Attributes | Report Details |
| Report Title | Unidirectional Knife Gate Valves Market Research Report |
| By Type | Wafer Type, Lug Type |
| By Application | Commercial, Industrial, Others |
| By Companies | DeZURIK, ORBINOX, Bray, LK Valves, Davis Valve, Tecofi |
| Regions Covered | North America, Europe, APAC, Latin America, MEA |
| Base Year | 2020 |
| Historical Year | 2018 to 2019 (Data from 2010 can be provided as per availability) |
| Forecast Year | 2028 |
| Number of Pages | 238 |
| Number of Tables & Figures | 167 |
| Customization Available | Yes, the report can be customized as per your need. |
The report covers comprehensive data on emerging trends, market drivers, growth opportunities, and restraints that can change the market dynamics of the industry. It provides an in-depth analysis of the market segments which include products, applications, and competitor analysis.
Global Unidirectional Knife Gate Valves Market Report Segments:
The market is segmented by Type Wafer Type, Lug Type and By Application Commercial, Industrial, Others.
Some of the companies that are profiled in this report are:
- DeZURIK
- ORBINOX
- Bray
- LK Valves
- Davis Valve
- Tecofi
Unidirectional Knife Gate Valves Market research report delivers a close watch on leading competitors with strategic analysis, micro and macro market trend and scenarios, pricing analysis and a holistic overview of the market situations in the forecast period. It is a professional and a detailed report focusing on primary and secondary drivers, market share, leading segments and geographical analysis. Further, key players, major collaborations, merger & acquisitions along with trending innovation and business policies are reviewed in the report.
Key Benefits for Industry Participants & Stakeholders:
- Industry drivers, restraints, and opportunities covered in the study
- Neutral perspective on the market performance
- Recent industry trends and developments
- Competitive landscape & strategies of key players
- Potential & niche segments and regions exhibiting promising growth covered
- Historical, current, and projected market size, in terms of value
- In-depth analysis of the Unidirectional Knife Gate Valves Market
Overview of the regional outlook of the Unidirectional Knife Gate Valves Market:
Based on region, the market is segmented into North America, Europe, Asia Pacific, Latin America and Middle East & Africa (MEA). North America region is further bifurcated into countries such as U.S., and Canada. The Europe region is further categorized into U.K., France, Germany, Italy, Spain, Russia, and Rest of Europe. Asia Pacific is further segmented into China, Japan, South Korea, India, Australia, South East Asia, and Rest of Asia Pacific. Latin America region is further segmented into Brazil, Mexico, and Rest of Latin America, and the MEA region is further divided into GCC, Turkey, South Africa, and Rest of MEA.
Highlights of The Unidirectional Knife Gate Valves Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of Unidirectional Knife Gate Valves Market.
- Historical data and forecast.
- Estimations for the forecast period 2028.
- Developments and trends in the market.
- By Type:
1. Wafer Type
2. Lug Type
7. By Application:1. Commercial
2. Industrial
3. Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Unidirectional Knife Gate Valves Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2028.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
Reasons to Purchase the Unidirectional Knife Gate Valves Market Report:
- The report includes a plethora of information such as market dynamics scenario and opportunities during the forecast period
- Segments and sub-segments include quantitative, qualitative, value (USD Million,) and volume (Units Million) data.
- Regional, sub-regional, and country level data includes the demand and supply forces along with their influence on the market.
- The competitive landscape comprises share of key players, new developments, and strategies in the last three years.
- Comprehensive companies offering products, relevant financial information, recent developments, SWOT analysis, and strategies by these players.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Unidirectional Knife Gate Valves Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Unidirectional Knife Gate Valves Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Unidirectional Knife Gate Valves Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Unidirectional Knife Gate Valves Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Unidirectional Knife Gate Valves Market Size & Forecast, 2018-2028
4.5.1 Unidirectional Knife Gate Valves Market Size and Y-o-Y Growth
4.5.2 Unidirectional Knife Gate Valves Market Absolute $ Opportunity
Chapter 5 Global Unidirectional Knife Gate Valves Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Unidirectional Knife Gate Valves Market Size Forecast by Type
5.2.1 Wafer Type
5.2.2 Lug Type
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Unidirectional Knife Gate Valves Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Unidirectional Knife Gate Valves Market Size Forecast by Applications
6.2.1 Commercial
6.2.2 Industrial
6.2.3 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Unidirectional Knife Gate Valves Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Unidirectional Knife Gate Valves Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Unidirectional Knife Gate Valves Analysis and Forecast
9.1 Introduction
9.2 North America Unidirectional Knife Gate Valves Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Unidirectional Knife Gate Valves Market Size Forecast by Type
9.6.1 Wafer Type
9.6.2 Lug Type
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Unidirectional Knife Gate Valves Market Size Forecast by Applications
9.10.1 Commercial
9.10.2 Industrial
9.10.3 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Unidirectional Knife Gate Valves Analysis and Forecast
10.1 Introduction
10.2 Europe Unidirectional Knife Gate Valves Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Unidirectional Knife Gate Valves Market Size Forecast by Type
10.6.1 Wafer Type
10.6.2 Lug Type
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Unidirectional Knife Gate Valves Market Size Forecast by Applications
10.10.1 Commercial
10.10.2 Industrial
10.10.3 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Unidirectional Knife Gate Valves Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Unidirectional Knife Gate Valves Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Unidirectional Knife Gate Valves Market Size Forecast by Type
11.6.1 Wafer Type
11.6.2 Lug Type
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Unidirectional Knife Gate Valves Market Size Forecast by Applications
11.10.1 Commercial
11.10.2 Industrial
11.10.3 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Unidirectional Knife Gate Valves Analysis and Forecast
12.1 Introduction
12.2 Latin America Unidirectional Knife Gate Valves Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Unidirectional Knife Gate Valves Market Size Forecast by Type
12.6.1 Wafer Type
12.6.2 Lug Type
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Unidirectional Knife Gate Valves Market Size Forecast by Applications
12.10.1 Commercial
12.10.2 Industrial
12.10.3 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Unidirectional Knife Gate Valves Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Unidirectional Knife Gate Valves Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Unidirectional Knife Gate Valves Market Size Forecast by Type
13.6.1 Wafer Type
13.6.2 Lug Type
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Unidirectional Knife Gate Valves Market Size Forecast by Applications
13.10.1 Commercial
13.10.2 Industrial
13.10.3 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Unidirectional Knife Gate Valves Market: Competitive Dashboard
14.2 Global Unidirectional Knife Gate Valves Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 DeZURIK
14.3.2 ORBINOX
14.3.3 Bray
14.3.4 LK Valves
14.3.5 Davis Valve
14.3.6 Tecofi
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Unidirectional Knife Gate Valves Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Unidirectional Knife Gate Valves Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Unidirectional Knife Gate Valves Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Unidirectional Knife Gate Valves Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Unidirectional Knife Gate Valves Market Size & Forecast, 2018-2028
4.5.1 Unidirectional Knife Gate Valves Market Size and Y-o-Y Growth
4.5.2 Unidirectional Knife Gate Valves Market Absolute $ Opportunity
Chapter 5 Global Unidirectional Knife Gate Valves Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Unidirectional Knife Gate Valves Market Size Forecast by Type
5.2.1 Wafer Type
5.2.2 Lug Type
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Unidirectional Knife Gate Valves Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Unidirectional Knife Gate Valves Market Size Forecast by Applications
6.2.1 Commercial
6.2.2 Industrial
6.2.3 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Unidirectional Knife Gate Valves Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Unidirectional Knife Gate Valves Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Unidirectional Knife Gate Valves Analysis and Forecast
9.1 Introduction
9.2 North America Unidirectional Knife Gate Valves Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Unidirectional Knife Gate Valves Market Size Forecast by Type
9.6.1 Wafer Type
9.6.2 Lug Type
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Unidirectional Knife Gate Valves Market Size Forecast by Applications
9.10.1 Commercial
9.10.2 Industrial
9.10.3 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Unidirectional Knife Gate Valves Analysis and Forecast
10.1 Introduction
10.2 Europe Unidirectional Knife Gate Valves Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Unidirectional Knife Gate Valves Market Size Forecast by Type
10.6.1 Wafer Type
10.6.2 Lug Type
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Unidirectional Knife Gate Valves Market Size Forecast by Applications
10.10.1 Commercial
10.10.2 Industrial
10.10.3 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Unidirectional Knife Gate Valves Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Unidirectional Knife Gate Valves Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Unidirectional Knife Gate Valves Market Size Forecast by Type
11.6.1 Wafer Type
11.6.2 Lug Type
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Unidirectional Knife Gate Valves Market Size Forecast by Applications
11.10.1 Commercial
11.10.2 Industrial
11.10.3 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Unidirectional Knife Gate Valves Analysis and Forecast
12.1 Introduction
12.2 Latin America Unidirectional Knife Gate Valves Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Unidirectional Knife Gate Valves Market Size Forecast by Type
12.6.1 Wafer Type
12.6.2 Lug Type
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Unidirectional Knife Gate Valves Market Size Forecast by Applications
12.10.1 Commercial
12.10.2 Industrial
12.10.3 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Unidirectional Knife Gate Valves Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Unidirectional Knife Gate Valves Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Unidirectional Knife Gate Valves Market Size Forecast by Type
13.6.1 Wafer Type
13.6.2 Lug Type
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Unidirectional Knife Gate Valves Market Size Forecast by Applications
13.10.1 Commercial
13.10.2 Industrial
13.10.3 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Unidirectional Knife Gate Valves Market: Competitive Dashboard
14.2 Global Unidirectional Knife Gate Valves Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 DeZURIK
14.3.2 ORBINOX
14.3.3 Bray
14.3.4 LK Valves
14.3.5 Davis Valve
14.3.6 Tecofi
Segments Covered in the Report
The global Unidirectional Knife Gate Valves market has been segmented based on
By Types
The global Unidirectional Knife Gate Valves market has been segmented based on
By Types
- Wafer Type
- Lug Type
- Commercial
- Industrial
- Others
- Asia Pacific
- North America
- Latin America
- Europe
- Middle East & Africa
- DeZURIK
- ORBINOX
- Bray
- LK Valves
- Davis Valve
- Tecofi
Our Clients
Related Reports
Some other reports from this category!
