The Global Hydrostatic Fan Drive Systems Market Size is expected to grow at a CAGR of 4.8% during the forecast period, from USD 3.4 billion in 2021 to USD 5.6 billion by 2028. The growth of this market is driven by increasing demand for passenger cars and off-road vehicles, as well as growing demand for buses and trucks amid rapid urbanization worldwide.
It is a mechanical device that transfers power from the engine to an axial piston pump. This type of drive system can be found in on-road vehicles, buses, trucks, off-road vehicles, and construction equipment. The hydrostatic fan drive system is very cost-effective because it doesn’t require any additional gears or clutches. It does not need an electrical system for electricity, and it is possible to find both manual or automatic controls depending on the model of the vehicle.
The hydrostatic fan drive system has a higher displacement than other types of systems because there are no fluid seals in between the engine crankshaft and shaft that delivers power to the piston pump which can result in reduced operating efficiency as well as increased vibration levels.
On the basis of Types, the market is segmented into variable axial piston pumps, fixed gear motors, engine control units, oil coolers, hydraulic valves, and sensors.
Variable axial piston pumps are the most commonly used type of hydrostatic fan drive system found in automobiles. They are a type of hydraulic pump that forces fluid through the engine and out to each of the wheels, providing power for steering as well as braking. The pressure at which these car parts function is controlled by the use of an electric actuator control unit (ECU), oil cooler, and/or hydraulic valves & sensors.
A fixed-gear motor is a type of hydrostatic fan drive system that uses an engine to generate electricity and power a water pump. It can be used in applications where the use of variable axial piston pumps, such as on-road vehicles, buses, trucks, off-road vehicles, construction & mining equipment are not feasible or desirable for various reasons.
An engine control unit is a device that controls the power generated by an internal combustion engine. It manages fuel supply and ignition timing, as well as other tasks related to emissions management and energy conservation.
An oil cooler is a heat exchanger that lowers the temperature of the engine coolant. Oil circulates through the cooler to absorb and remove some waste energy from being transferred back into the engine, which in turn lowers the overall temperature of fluids flowing through it. The lower temperature protects vital components by reducing their wear rate or even preventing overheating altogether.
Hydraulic valves are the devices that control fluid flow in a hydraulic system. They can be used to open or close passages, regulate pressure and direct the flow of fluids. Sensors measure various conditions such as temperature, level, etc., which influence how much power is delivered by different components on your vehicle.
On the basis of Application, the market is segmented into On-Road Vehicles, Bus, Truck, Off-road vehicles, Construction & Mining, Agricultural, train, metro, and Trams.
The hydrostatic fan drive system is used in on-road vehicles to provide airflow for engine cooling. This type of system also works as an intake and exhaust valve for the engine, which means that it helps regulate heat distribution within the vehicle’s cabin.
The hydrostatic fan drive system is used in buses to increase efficiency and reduce emissions of engines. The hydrostatic drives are also widely applied for trucks with a heavy load, train locomotives, metro cars, etc.
Hydrostatic fan drive systems are often used in trucks to provide power and torque from the engine for driving a hydraulic pump that can be reversed. The hydrostatic system is typically chosen because it provides more versatility than an electrically powered motor-driven fan which cannot reverse direction without switching its polarity.
Off-road vehicles are large, heavy machines that need to be able to travel over rough terrain. They usually have four-wheel drive and transmission with high torque transfer capability. Therefore, they require hydrostatic fan drive systems for their power needs. These types of vehicles include construction equipment such as bulldozers or cranes, earthmovers like rock trucks or dozer blades, loaders used in mining operations, and agricultural equipment including harvesters and combines.
The use of hydrostatic fan drive systems in the construction & mining segment is increasing for providing the required power to operate heavy equipment. The installation of this system can be done easily on various types of excavators and loaders, which are used by major players such as Caterpillar Inc., Komatsu Ltd., New Holland Tractor Co., JCB Limited, Euclid Construction Machinery Company LLC, CNH Industrial NV-SA (CNH), STV Group S.A.S, Hitachi Construction Machinery Co., Ltd and Volvo CE AB (Volvo).
The agricultural sector is one of the largest sectors in which hydrostatic fan drive systems are used. These types of devices can be helpful for irrigation, fertilizing, and drainage purposes among others. The main advantage that these systems give to this industry is their high-pressure capabilities as well as low noise levels when operating at a full speed. This makes them very useful not only for more profitable crop production but also helps with managing water conservation practices on large farms or ranches where other farming methods would require much higher costs due to using manual labor instead of machines.
One of the major applications of hydrostatic fan drive systems in trains is to provide a means for locomotives and passenger cars to be moved. Locomotive power is transmitted by hydraulic lines through a coupling device (called an "accumulator") located on each axle, then connected via flexible hoses back to the locomotive's main reservoir tanks. The accumulators are typically large steel spheres that contain oil at high pressure such that when heated they have enough force to move or stop a train weighing up to 100 tons.
Hydrostatic fan drive systems can also be found on trains operating in remote locations like mines and quarries - many of which are powered by diesel engines. These machines provide railways with an efficient way to transport goods while simultaneously allowing them to control their speed at will. They do not require any external input force other than gravity since the power is generated by pumping fluid from one side to another.
The cars of the metro system are fitted with hydrostatic fan drive systems. The hydraulics in these systems allow for fluid to be pumped from one side to another, causing a chain reaction that moves the car up and down on rails. In areas where there is no power grid or electricity supply, this technology has been used as an alternative form of transportation for people living without running water and sanitation facilities.
In a tram, the hydrostatic fan drive system is used to power the traction motors on each bogie. This allows for trams to be lighter and more efficient than cars with an electric motor inside. Unlike a car though, they also have a large overhead wire that carries electricity from one end of the track to another through this system. Tram systems are often found in cities where it's hard or dangerous to travel by foot due to traffic congestion and heavy use of vehicles such as buses and cars.
On the basis of Region, the market is segmented into North America, Europe, Asia Pacific, and the Rest of the World. North America is expected to be a leading market for hydrostatic fan drive systems owing to the stringent environmental regulations imposed by U.S Environmental Protection Agency (EPA).
The growth of the hydrostatic fan drive systems market can be attributed to factors such as increased use of the system in various industries and growing awareness about these technologies. Moreover, the rising demand for sustainable energy sources is also facilitating this market's development.
Increased use of HFD Systems across different industry segments: Hydrostatic Fan Drive Systems are used in a number of industrial applications, owing to their high efficiency and low maintenance costs among other features like environmental friendliness and easy installation process. For example, they are widely deployed by manufacturers of buses or trucks where they provide air cooling at an efficient pace with minimal noise pollution right before it gets into the engine compartment while being driven on roads. In addition, these systems are extensively used in construction and mining equipment, as well as in agricultural machinery.
Up Market Research published a new report titled “Hydrostatic Fan Drive Systems Market research report which is segmented by Types (Variable Axial Piston Pump, Fixed Gear Motor, Engine control unit, Oil Cooler, Hydraulic Valves & Sensors), By Applications (On Road Vehicles, Bus, Truck, Off road vehicles, Construction & Mining, Agricultural, Train, Metro and Trams), By Players/Companies Bosch, Eaton, Parker Hannifin, Jtekt, Danfoss, Concentric, Bucher Hydraulics, Hawe Hydraulik, Walvoil, Bondioli & Pavesi, Casappa, Enovation Controls, Hydac International, Hydrosila Group, Axiomatic Technologies”.
Report Attributes | Report Details |
Report Title | Hydrostatic Fan Drive Systems Market Research Report |
By Type | Variable Axial Piston Pump, Fixed Gear Motor, Engine control unit, Oil Cooler, Hydraulic Valves & Sensors |
By Application | On Road Vehicles, Bus, Truck, Off road vehicles, Construction & Mining, Agricultural, Train, Metro and Trams |
By Companies | Bosch, Eaton, Parker Hannifin, Jtekt, Danfoss, Concentric, Bucher Hydraulics, Hawe Hydraulik, Walvoil, Bondioli & Pavesi, Casappa, Enovation Controls, Hydac International, Hydrosila Group, Axiomatic Technologies |
Regions Covered | North America, Europe, APAC, Latin America, MEA |
Base Year | 2020 |
Historical Year | 2018 to 2019 (Data from 2010 can be provided as per availability) |
Forecast Year | 2028 |
Number of Pages | 206 |
Number of Tables & Figures | 145 |
Customization Available | Yes, the report can be customized as per your need. |
The report covers comprehensive data on emerging trends, market drivers, growth opportunities, and restraints that can change the market dynamics of the industry. It provides an in-depth analysis of the market segments which include products, applications, and competitor analysis.
The market is segmented by Type Variable Axial Piston Pump, Fixed Gear Motor, Engine control unit, Oil Cooler, Hydraulic Valves & Sensors and By Application On Road Vehicles, Bus, Truck, Off road vehicles, Construction & Mining, Agricultural, Train, Metro and Trams.
Some of the companies that are profiled in this report are:
Hydrostatic Fan Drive Systems Market research report delivers a close watch on leading competitors with strategic analysis, micro and macro market trend and scenarios, pricing analysis and a holistic overview of the market situations in the forecast period. It is a professional and a detailed report focusing on primary and secondary drivers, market share, leading segments and geographical analysis. Further, key players, major collaborations, merger & acquisitions along with trending innovation and business policies are reviewed in the report.
Key Benefits for Industry Participants & Stakeholders:
Based on region, the market is segmented into North America, Europe, Asia Pacific, Latin America and Middle East & Africa (MEA). North America region is further bifurcated into countries such as U.S., and Canada. The Europe region is further categorized into U.K., France, Germany, Italy, Spain, Russia, and Rest of Europe. Asia Pacific is further segmented into China, Japan, South Korea, India, Australia, South East Asia, and Rest of Asia Pacific. Latin America region is further segmented into Brazil, Mexico, and Rest of Latin America, and the MEA region is further divided into GCC, Turkey, South Africa, and Rest of MEA.
We have studied the Hydrostatic Fan Drive Systems Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2028.
How you may use our products:
Reasons to Purchase the Hydrostatic Fan Drive Systems Market Report:
Some other reports from this category!