Global Engine Cylinder Liner Market by Type (Aluminum Alloy Engine Cylinder Liners, Titanium Alloy Engine Cylinder Liners, Steel Engine Cylinder Liners), By Application (Commercial Vehicle, Passenger Vehicle) and Region (North America, Latin America, Europe, Asia Pacific and Middle East & Africa), Forecast To 2028
The Global Engine Cylinder Liner Market size is projected to grow at a CAGR of 4.5% during the forecast period, to reach an estimated value of USD X.XX billion by 2028 from USD 5.68 billion in 2018. The growing demand for light commercial vehicles coupled with the rapid adoption of passenger cars in emerging economies is the key factor fuelling the growth of this market over the next few years.
Engine cylinder liner is a cylindrical component made of aluminum alloy, titanium alloy, or steel. It has the primary function to provide structural support for piston rings in high-performance internal combustion engines. The engine cylinder liners are formed by cutting an opening into the wall of billet cast cylinders and then fitting with different types of metal sheets including ceramic, cast iron, and steel. Engine cylinder liners are made of high-quality metal which provides durability to the engine. It also helps in keeping friction between piston and crankshaft, thus reducing wear & tear. Another major benefit is that it increases the efficiency of fuel combustion, resulting in less emission generation.
On the basis of Type, the global engine cylinder liner market is segmented into Aluminum Alloy Engine Cylinder Liners, Titanium Alloy Engine Cylinder Liners, and Steel engine cylinder liners.
Aluminum Alloy Engine Cylinder Liners:
Aluminum alloy engine cylinder liners are designed to be stronger than cast iron. The material is more lightweight, which reduces the rotating mass of the crankshaft assembly and helps improve fuel economy. This design has become integral in modern vehicle manufacturing given the increasing demand for low-emission engines that can meet stricter emissions regulations without compromising performance or durability. Aluminum alloy is the most commonly used material in commercial applications for its ability to withstand higher temperatures involved with diesel combustion. Steel, on the other hand, tends to be more prevalent in passenger vehicles because of lower cost and better heat dissipation capabilities during normal conditions.
Titanium Alloy Engine Cylinder Liners:
Titanium alloy engine cylinder liners are harder and more durable in comparison to aluminum alloy or steel. They possess superior features that make them ideal for heavy vehicles, trucking & mining applications. It has excellent anti-scuff properties which means it requires less downtime when compared with other types of cylinders. Titanium alloy has high strength, excellent corrosion resistance, and fatigue strength. The compressive properties of titanium alloys are also good in comparison to steel. Other benefits include thermal conductivity which aids heat dissipation into surrounding components that may be improved with its low-density ratio.
Steel Engine Cylinder Liners:
Steel engine cylinder liners are high-performance engines that use the same technology as an aluminum alloy or titanium alloy. Steel engine cylinder liners are the most common type of cylinders used in all types of vehicles. They have a high thermal conductivity and heat dissipation, making them ideal for use with diesel engines which generate more heat than petrol engines. Steel alloy is also inexpensive compared to other options such as titanium or aluminum alloy.
On the basis of Application, the global engine cylinder liner market is segmented into Commercial Vehicles and Passenger Vehicles.
On the basis of Region, the global engine cylinder liner market is segmented into North America, Latin America, Europe, Asia Pacific, Middle East & Africa. North America held the largest market share in 2017, closely followed by Europe. The Asia Pacific is expected to be the fastest-growing region during the forecast period owing to increasing vehicle production, stringent environmental regulations and rapidly changing customer preference for high-performance vehicles. In terms of market size, Latin America is expected to account for a share of 13.44% in the engine cylinder liner market by 2028 end. The growth in this region can be attributed to the increasing passenger car sales and industrialization activities across countries such as Brazil, Mexico & Argentina.
In the Middle East, engine cylinder liners are widely used in the commercial vehicle segment. The region is expected to have a higher demand for engine cylinder liners during the forecast period due to increasing disposable income and the growing automotive industry in countries such as Saudi Arabia, UAE & Israel. The growth can be attributed to factors such as a rise in demand for vehicles and replacement engines leading towards improved fuel efficiency, a growing number of passenger cars along with commercial vehicles produced annually. Africa allows the use of laminated steel engine cylinder liners for commercial vehicles. There are many upcoming projects in North East and South regions, which will drive demand for engine cylinder liners during the forecast period.
Growth Factors For The Global Engine Cylinder Liner Market:
The growth factors for the global engine cylinder liner market are stringent emission norms, growing vehicle production, rising demand for high-performance engines, and increasing use of aluminum alloy liners. In addition, the increasing demand from emerging economies will also contribute to the growth of the global engine cylinder liner market. Due to stringent emission norms and growing vehicle production globally, manufacturers are focusing on reducing harmful emissions by adopting new technologies such as gasoline direct injection engines which have a low compression ratio and require high-performance liners. The growing production of passenger vehicles is another factor that will fuel the market growth.
Up Market Research published a new report titled “Engine Cylinder Liner Market research report which is segmented by Types (Aluminum Alloy Engine Cylinder Liners, Titanium Alloy Engine Cylinder Liners, Steel Engine Cylinder Liners), By Applications (Commercial Vehicle, Passenger Vehicle), By Players/Companies Kusalava, Tenneco, Mahle, Nippon Piston Rings, ZYNP, Westwood Cylinder Liners, TEIKOKU PISTON RING, Melling, PowerBore, CHENGDU GALAXY POWER, Esteem Auto, Laystall”. As per the study the market is expected to grow at a CAGR of XX% in the forecast period.
Report Scope
| Report Attributes | Report Details |
| Report Title | Engine Cylinder Liner Market Research Report |
| By Type | Aluminum Alloy Engine Cylinder Liners, Titanium Alloy Engine Cylinder Liners, Steel Engine Cylinder Liners |
| By Application | Commercial Vehicle, Passenger Vehicle |
| By Companies | Kusalava, Tenneco, Mahle, Nippon Piston Rings, ZYNP, Westwood Cylinder Liners, TEIKOKU PISTON RING, Melling, PowerBore, CHENGDU GALAXY POWER, Esteem Auto, Laystall |
| Regions Covered | North America, Europe, APAC, Latin America, MEA |
| Base Year | 2020 |
| Historical Year | 2018 to 2019 (Data from 2010 can be provided as per availability) |
| Forecast Year | 2028 |
| Number of Pages | 226 |
| Number of Tables & Figures | 159 |
| Customization Available | Yes, the report can be customized as per your need. |
The report covers comprehensive data on emerging trends, market drivers, growth opportunities, and restraints that can change the market dynamics of the industry. It provides an in-depth analysis of the market segments which include products, applications, and competitor analysis.
Global Engine Cylinder Liner Market Report Segments:
The market is segmented by Type Aluminum Alloy Engine Cylinder Liners, Titanium Alloy Engine Cylinder Liners, Steel Engine Cylinder Liners and By Application Commercial Vehicle, Passenger Vehicle.
Some of the companies that are profiled in this report are:
- Kusalava
- Tenneco
- Mahle
- Nippon Piston Rings
- ZYNP
- Westwood Cylinder Liners
- TEIKOKU PISTON RING
- Melling
- PowerBore
- CHENGDU GALAXY POWER
- Esteem Auto
- Laystall
Engine Cylinder Liner Market research report delivers a close watch on leading competitors with strategic analysis, micro and macro market trend and scenarios, pricing analysis and a holistic overview of the market situations in the forecast period. It is a professional and a detailed report focusing on primary and secondary drivers, market share, leading segments and geographical analysis. Further, key players, major collaborations, merger & acquisitions along with trending innovation and business policies are reviewed in the report.
Key Benefits for Industry Participants & Stakeholders:
- Industry drivers, restraints, and opportunities covered in the study
- Neutral perspective on the market performance
- Recent industry trends and developments
- Competitive landscape & strategies of key players
- Potential & niche segments and regions exhibiting promising growth covered
- Historical, current, and projected market size, in terms of value
- In-depth analysis of the Engine Cylinder Liner Market
Overview of the regional outlook of the Engine Cylinder Liner Market:
Based on region, the market is segmented into North America, Europe, Asia Pacific, Latin America and Middle East & Africa (MEA). North America region is further bifurcated into countries such as U.S., and Canada. The Europe region is further categorized into U.K., France, Germany, Italy, Spain, Russia, and Rest of Europe. Asia Pacific is further segmented into China, Japan, South Korea, India, Australia, South East Asia, and Rest of Asia Pacific. Latin America region is further segmented into Brazil, Mexico, and Rest of Latin America, and the MEA region is further divided into GCC, Turkey, South Africa, and Rest of MEA.
Highlights of The Engine Cylinder Liner Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of Engine Cylinder Liner Market.
- Historical data and forecast.
- Estimations for the forecast period 2028.
- Developments and trends in the market.
- By Type:
1. Aluminum Alloy Engine Cylinder Liners
2. Titanium Alloy Engine Cylinder Liners
3. Steel Engine Cylinder Liners
7. By Application:1. Commercial Vehicle
2. Passenger Vehicle
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Engine Cylinder Liner Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2028.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
Reasons to Purchase the Engine Cylinder Liner Market Report:
- The report includes a plethora of information such as market dynamics scenario and opportunities during the forecast period
- Segments and sub-segments include quantitative, qualitative, value (USD Million,) and volume (Units Million) data.
- Regional, sub-regional, and country level data includes the demand and supply forces along with their influence on the market.
- The competitive landscape comprises share of key players, new developments, and strategies in the last three years.
- Comprehensive companies offering products, relevant financial information, recent developments, SWOT analysis, and strategies by these players.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Engine Cylinder Liner Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Engine Cylinder Liner Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Engine Cylinder Liner Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Engine Cylinder Liner Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Engine Cylinder Liner Market Size & Forecast, 2018-2028
4.5.1 Engine Cylinder Liner Market Size and Y-o-Y Growth
4.5.2 Engine Cylinder Liner Market Absolute $ Opportunity
Chapter 5 Global Engine Cylinder Liner Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Engine Cylinder Liner Market Size Forecast by Type
5.2.1 Aluminum Alloy Engine Cylinder Liners
5.2.2 Titanium Alloy Engine Cylinder Liners
5.2.3 Steel Engine Cylinder Liners
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Engine Cylinder Liner Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Engine Cylinder Liner Market Size Forecast by Applications
6.2.1 Commercial Vehicle
6.2.2 Passenger Vehicle
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Engine Cylinder Liner Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Engine Cylinder Liner Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Engine Cylinder Liner Analysis and Forecast
9.1 Introduction
9.2 North America Engine Cylinder Liner Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Engine Cylinder Liner Market Size Forecast by Type
9.6.1 Aluminum Alloy Engine Cylinder Liners
9.6.2 Titanium Alloy Engine Cylinder Liners
9.6.3 Steel Engine Cylinder Liners
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Engine Cylinder Liner Market Size Forecast by Applications
9.10.1 Commercial Vehicle
9.10.2 Passenger Vehicle
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Engine Cylinder Liner Analysis and Forecast
10.1 Introduction
10.2 Europe Engine Cylinder Liner Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Engine Cylinder Liner Market Size Forecast by Type
10.6.1 Aluminum Alloy Engine Cylinder Liners
10.6.2 Titanium Alloy Engine Cylinder Liners
10.6.3 Steel Engine Cylinder Liners
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Engine Cylinder Liner Market Size Forecast by Applications
10.10.1 Commercial Vehicle
10.10.2 Passenger Vehicle
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Engine Cylinder Liner Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Engine Cylinder Liner Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Engine Cylinder Liner Market Size Forecast by Type
11.6.1 Aluminum Alloy Engine Cylinder Liners
11.6.2 Titanium Alloy Engine Cylinder Liners
11.6.3 Steel Engine Cylinder Liners
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Engine Cylinder Liner Market Size Forecast by Applications
11.10.1 Commercial Vehicle
11.10.2 Passenger Vehicle
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Engine Cylinder Liner Analysis and Forecast
12.1 Introduction
12.2 Latin America Engine Cylinder Liner Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Engine Cylinder Liner Market Size Forecast by Type
12.6.1 Aluminum Alloy Engine Cylinder Liners
12.6.2 Titanium Alloy Engine Cylinder Liners
12.6.3 Steel Engine Cylinder Liners
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Engine Cylinder Liner Market Size Forecast by Applications
12.10.1 Commercial Vehicle
12.10.2 Passenger Vehicle
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Engine Cylinder Liner Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Engine Cylinder Liner Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Engine Cylinder Liner Market Size Forecast by Type
13.6.1 Aluminum Alloy Engine Cylinder Liners
13.6.2 Titanium Alloy Engine Cylinder Liners
13.6.3 Steel Engine Cylinder Liners
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Engine Cylinder Liner Market Size Forecast by Applications
13.10.1 Commercial Vehicle
13.10.2 Passenger Vehicle
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Engine Cylinder Liner Market: Competitive Dashboard
14.2 Global Engine Cylinder Liner Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Kusalava
14.3.2 Tenneco
14.3.3 Mahle
14.3.4 Nippon Piston Rings
14.3.5 ZYNP
14.3.6 Westwood Cylinder Liners
14.3.7 TEIKOKU PISTON RING
14.3.8 Melling
14.3.9 PowerBore
14.3.10 CHENGDU GALAXY POWER
14.3.11 Esteem Auto
14.3.12 Laystall
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Engine Cylinder Liner Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Engine Cylinder Liner Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Engine Cylinder Liner Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Engine Cylinder Liner Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Engine Cylinder Liner Market Size & Forecast, 2018-2028
4.5.1 Engine Cylinder Liner Market Size and Y-o-Y Growth
4.5.2 Engine Cylinder Liner Market Absolute $ Opportunity
Chapter 5 Global Engine Cylinder Liner Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Engine Cylinder Liner Market Size Forecast by Type
5.2.1 Aluminum Alloy Engine Cylinder Liners
5.2.2 Titanium Alloy Engine Cylinder Liners
5.2.3 Steel Engine Cylinder Liners
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Engine Cylinder Liner Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Engine Cylinder Liner Market Size Forecast by Applications
6.2.1 Commercial Vehicle
6.2.2 Passenger Vehicle
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Engine Cylinder Liner Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Engine Cylinder Liner Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Engine Cylinder Liner Analysis and Forecast
9.1 Introduction
9.2 North America Engine Cylinder Liner Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Engine Cylinder Liner Market Size Forecast by Type
9.6.1 Aluminum Alloy Engine Cylinder Liners
9.6.2 Titanium Alloy Engine Cylinder Liners
9.6.3 Steel Engine Cylinder Liners
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Engine Cylinder Liner Market Size Forecast by Applications
9.10.1 Commercial Vehicle
9.10.2 Passenger Vehicle
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Engine Cylinder Liner Analysis and Forecast
10.1 Introduction
10.2 Europe Engine Cylinder Liner Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Engine Cylinder Liner Market Size Forecast by Type
10.6.1 Aluminum Alloy Engine Cylinder Liners
10.6.2 Titanium Alloy Engine Cylinder Liners
10.6.3 Steel Engine Cylinder Liners
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Engine Cylinder Liner Market Size Forecast by Applications
10.10.1 Commercial Vehicle
10.10.2 Passenger Vehicle
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Engine Cylinder Liner Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Engine Cylinder Liner Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Engine Cylinder Liner Market Size Forecast by Type
11.6.1 Aluminum Alloy Engine Cylinder Liners
11.6.2 Titanium Alloy Engine Cylinder Liners
11.6.3 Steel Engine Cylinder Liners
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Engine Cylinder Liner Market Size Forecast by Applications
11.10.1 Commercial Vehicle
11.10.2 Passenger Vehicle
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Engine Cylinder Liner Analysis and Forecast
12.1 Introduction
12.2 Latin America Engine Cylinder Liner Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Engine Cylinder Liner Market Size Forecast by Type
12.6.1 Aluminum Alloy Engine Cylinder Liners
12.6.2 Titanium Alloy Engine Cylinder Liners
12.6.3 Steel Engine Cylinder Liners
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Engine Cylinder Liner Market Size Forecast by Applications
12.10.1 Commercial Vehicle
12.10.2 Passenger Vehicle
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Engine Cylinder Liner Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Engine Cylinder Liner Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Engine Cylinder Liner Market Size Forecast by Type
13.6.1 Aluminum Alloy Engine Cylinder Liners
13.6.2 Titanium Alloy Engine Cylinder Liners
13.6.3 Steel Engine Cylinder Liners
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Engine Cylinder Liner Market Size Forecast by Applications
13.10.1 Commercial Vehicle
13.10.2 Passenger Vehicle
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Engine Cylinder Liner Market: Competitive Dashboard
14.2 Global Engine Cylinder Liner Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Kusalava
14.3.2 Tenneco
14.3.3 Mahle
14.3.4 Nippon Piston Rings
14.3.5 ZYNP
14.3.6 Westwood Cylinder Liners
14.3.7 TEIKOKU PISTON RING
14.3.8 Melling
14.3.9 PowerBore
14.3.10 CHENGDU GALAXY POWER
14.3.11 Esteem Auto
14.3.12 Laystall
Segments Covered in the Report
The global Engine Cylinder Liner market has been segmented based on
By Types
The global Engine Cylinder Liner market has been segmented based on
By Types
- Aluminum Alloy Engine Cylinder Liners
- Titanium Alloy Engine Cylinder Liners
- Steel Engine Cylinder Liners
- Commercial Vehicle
- Passenger Vehicle
- Asia Pacific
- North America
- Latin America
- Europe
- Middle East & Africa
- Kusalava
- Tenneco
- Mahle
- Nippon Piston Rings
- ZYNP
- Westwood Cylinder Liners
- TEIKOKU PISTON RING
- Melling
- PowerBore
- CHENGDU GALAXY POWER
- Esteem Auto
- Laystall
Our Clients
Related Reports
Some other reports from this category!
