The Global Digital Oscilloscope Market size is projected to grow at a CAGR of 6.9% from 2021-2028. The North American region is expected to account for the largest share during the forecast period, as it has been witnessing an increase in demand for digital oscilloscopes due to technological innovations and modernization of manufacturing processes.
A digital oscilloscope is an electrical measuring instrument with the capability of recording and displaying analog waveforms as a digital signal. The device measures voltage over time, typically for use in analyzing transient or repetitive signals within circuits or systems. Digital oscilloscopes are used extensively in electronics troubleshooting applications because they provide accurate readings when dealing with high frequencies common to semiconductors and other modern electronic devices (not limited to computers). Unlike analog scopes which measure amplitude at a single point in time and display these measurements using different colors on-screen, digital displays show amplitude values continuously across their length by marking every division separately. It has been observed that many people confuse this term with "voltage meter". However, there is a major difference between them; whereas voltmeters measure voltage levels, oscilloscopes show how the voltages change over time.
On the basis of Type, the global digital oscilloscope market is segmented into Portable Digital Oscilloscope and Benchtop Digital Oscilloscope.
A portable digital oscilloscope (PDO) is an instrument that measures the repetitive signals in power electronics. It can be used for the development, debugging, and troubleshooting of circuits. A PDO has two channels connected to it - one channel for input signal (usually from the circuit under test), and another channel for output signal which could also include trigger signal or noise measurement. The PDO displays both waveforms simultaneously on the same screen with different colors indicating time-domain representation displayed by amplitude values across their lengths using vertical lines or bars. This makes it easy to compare these waves visually without any calculations required because at every point in time there are two traces showing amplitude values changing over time as per fast as the oscilloscope can measure.
Benchtop Digital Oscilloscopes are instruments that find applications in a wide range of industries including consumer electronics, communications, aerospace, and automotive. They can be used to troubleshoot power systems or design digital circuits by analyzing the internal behavior of integrated circuit elements such as transistors and logic gates. These devices typically feature faster sampling rates than portable oscilloscope models with bandwidths up to 500 MHz which makes them an ideal choice for more complex measurements.
Benchtop Digital Oscilloscopes come in many different configurations depending on their intended use case but they all have one thing in common - a built-in X/Y data recorder mechanism that records voltage levels over time so it is easier to analyze captured signals later during post-analysis without manual data entry.
On the basis of Application, the global digital oscilloscope market is segmented into Consumer Electronics, Communications, Aerospace, Automotive, and Others.
Digital oscilloscopes are used in Consumer Electronics to measure the voltage or current of a signal.
Digital Oscilloscope is usually required for measuring signals that have low levels when they can be hard to analyze with other instruments due to its wide bandwidth and stability. This instrument plays an important role in communications, as it enhances performance by ensuring optimal signal quality at all times. They are also necessary for testing antennas, cables, and receivers, modems, etc., where measurements need a very high accuracy level. Some digital oscilloscopes may have built-in test equipment which helps them perform various types of tests on electronic circuits without requiring any additional devices or external power supplies such as voltmeters, ammeters, signal generators, etc.
Aerospace Industry is one sector where these instruments play a crucial role in ensuring accurate measurements during manufacturing procedures with extreme tolerances. Aerospace-grade digital oscilloscopes are a type of instrument which is specifically designed for use in the aerospace industry. They have higher specifications than other types of instruments to ensure accuracy and reliability while also catering to specific needs such as high voltage measurements or frequency range that might be required by different manufacturers, engineers, and technicians.
The digital oscilloscope is used for a variety of applications in the automotive industry. The most common application of this device would be to measure voltages and ground reference potentials on vehicle wiring harnesses, as well as measuring current signatures from sensors connected with powertrain control systems or engine management systems. It's also used for diagnosing faults such as grounding issues, intermittent connection problems, or open circuits by comparing voltage signals against one another.
On the basis of Region, the global digital oscilloscope market is segmented into North America, Latin America, Europe, Asia Pacific, and Middle East & Africa.
North America: the region is expected to maintain its dominance in this market until 2028. The major reason for the high demand for digital oscilloscopes from North American countries is due to the growing electronics industry coupled with increasing technology penetration across all industries which require accurate voltage measurements.
Latin America: Countries such as Argentina and Brazil are witnessing an increase in their manufacturing sectors owing to the introduction of new technologies like Industry Four and smart factories; these factors will drive digital oscilloscope demand over the next few years to come followed by a steady growth pattern over the forecast period 2021-2028.
Asia Pacific: Growing number of telecom networks along with rising IoT (Internet of Things) and AI (Artificial Intelligence) adoption in the region will boost digital oscilloscope demand over the forecast period 2021-2028.
The Middle East & Africa: The Middle Eastern countries, such as Saudi Arabia, UAE are witnessing a growth in the infrastructure sector which is expected to create new opportunities for manufacturing companies; this coupled with surging healthcare industry requirements and growing aerospace sectors that require power transmission testing equipment will propel regional digital oscilloscope market overtime to come followed by steady growth trajectory from 2020 onwards when geographical transitions take place.
Europe: Countries like France have seen an increase in their construction sectors owing to the rise in housing prices while Germany's automotive industry has witnessed significant improvements due to the introduction of new technologies including Industry Four.
The growth factors for the global digital oscilloscope market are growing demand in semiconductors, automotive, and aerospace industries. Increasing focus on quality assurance and regulatory compliance is also a major factor stimulating this market. With an increased need for electronics with high precision devices like digital oscilloscopes, there will be a rise in demand over time. The increasing demand for digital oscilloscopes in various industries such as consumer electronics, communications, aerospace, automotive, and teaching and research is expected to fuel the market growth.
Up Market Research published a new report titled “Digital Oscilloscope Sales Market research report which is segmented by Types (Portable Digital Oscilloscope, Benchtop Digital Oscilloscope), By Applications (Consumer Electronics, Communications, Aerospace, Automotive, Teaching and Research, Others), By Players/Companies Tektronix (Danaher), Keysight, Teledyne LeCroy, Rohde & Schwarz, GW Instek, Yokogawa, Fluke, Chauvin Arnoux, GAO Tek (GAO Group), RIGOL Technologies, SIGLENT Technologies, OWON, B&K Precision, Uni-Trend, TECPEL Co., Ltd., Hangzhou Jingce Electronic, Jiangsu Lvyang Electronic, Qingdao Hantek Electronic, Shenzhen Micsig Instruments”. As per the study the market is expected to grow at a CAGR of XX% in the forecast period.
Report Attributes | Report Details |
Report Title | Digital Oscilloscope Sales Market Research Report |
By Type | Portable Digital Oscilloscope, Benchtop Digital Oscilloscope |
By Application | Consumer Electronics, Communications, Aerospace, Automotive, Teaching and Research, Others |
By Companies | Tektronix (Danaher), Keysight, Teledyne LeCroy, Rohde & Schwarz, GW Instek, Yokogawa, Fluke, Chauvin Arnoux, GAO Tek (GAO Group), RIGOL Technologies, SIGLENT Technologies, OWON, B&K Precision, Uni-Trend, TECPEL Co., Ltd., Hangzhou Jingce Electronic, Jiangsu Lvyang Electronic, Qingdao Hantek Electronic, Shenzhen Micsig Instruments |
Regions Covered | North America, Europe, APAC, Latin America, MEA |
Base Year | 2020 |
Historical Year | 2018 to 2019 (Data from 2010 can be provided as per availability) |
Forecast Year | 2028 |
Number of Pages | 216 |
Number of Tables & Figures | 152 |
Customization Available | Yes, the report can be customized as per your need. |
The report covers comprehensive data on emerging trends, market drivers, growth opportunities, and restraints that can change the market dynamics of the industry. It provides an in-depth analysis of the market segments which include products, applications, and competitor analysis.
The market is segmented by Type Portable Digital Oscilloscope, Benchtop Digital Oscilloscope and By Application Consumer Electronics, Communications, Aerospace, Automotive, Teaching and Research, Others.
Some of the companies that are profiled in this report are:
Digital Oscilloscope Sales Market research report delivers a close watch on leading competitors with strategic analysis, micro and macro market trend and scenarios, pricing analysis and a holistic overview of the market situations in the forecast period. It is a professional and a detailed report focusing on primary and secondary drivers, market share, leading segments and geographical analysis. Further, key players, major collaborations, merger & acquisitions along with trending innovation and business policies are reviewed in the report.
Key Benefits for Industry Participants & Stakeholders:
Based on region, the market is segmented into North America, Europe, Asia Pacific, Latin America and Middle East & Africa (MEA). North America region is further bifurcated into countries such as U.S., and Canada. The Europe region is further categorized into U.K., France, Germany, Italy, Spain, Russia, and Rest of Europe. Asia Pacific is further segmented into China, Japan, South Korea, India, Australia, South East Asia, and Rest of Asia Pacific. Latin America region is further segmented into Brazil, Mexico, and Rest of Latin America, and the MEA region is further divided into GCC, Turkey, South Africa, and Rest of MEA.
We have studied the Digital Oscilloscope Sales Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2028.
How you may use our products:
Reasons to Purchase the Digital Oscilloscope Sales Market Report:
Some other reports from this category!